You can not throw away an empty bottle, but make an object out of it for interior decoration or.

2. Acetone.
3. Cotton wool.
4. A piece of sponge.
5. Acrylic paint (white matte).
6. Napkin for decoupage with roses.
7. PVA glue.
8. Fan synthetic brush.
9. Acrylic paints in green and red.
10. Brush for painting on nails No. 0.
11. Lacquer glossy.
12. Eggshell.
13. Natural brush No. 5.

Stages of decorating a bottle using the "" method.
1. An empty bottle must be cleaned of labels. Then degrease the glass with acetone.

2. The next step is priming the surface. To do this, you need to dip a piece of sponge into white acrylic paint and cover the entire bottle with dotted movements, except for the bottom. The bottom is covered last, after the main surface has dried.

3. After a while, apply the paint with another layer.

4. Let's start "decoupage".
5. On the napkin, you must select the desired pattern. For a small bottle, 2 identical oblong-shaped roses are suitable.

6. 2 layers must be separated from the napkin. To work, it is enough to use the top layer with the image.

7. We first apply one rose to the center of the bottle. Using a fan brush dipped in PVA glue, glue the napkin to the surface. Apply glue from the center of the napkin to the edge.

8. In the same way, glue the napkin to the other side of the bottle.

10. Then you should give the surface a shade.
11. At this stage, mix white and red until you get a pink tint. Paint the bottle with a sponge.

To give the product volume and a crackling effect, it is necessary to decorate the bottle with an eggshell. Surface decoration with eggshells.
1. The shell must be washed and cleaned of the film. Then dry and break into pieces of different sizes.

2. Apply glue to the surface around the rose.

3. We apply a piece of shell to the place where the glue is applied. Then press well with your finger so that the shell is securely fixed in place.

4. We glue the shell particles in a different order, choosing different sizes of pieces. There will be voids between the shells.

5. We glue the shell to the neck of the bottle.

6. The glue should dry well, and the shell should fit snugly on the surface.

8. Then you need to paint the cracks. To do this, with a thin brush and light green paint, you should draw voids between the shell.

The completion of the work will be varnishing the surface. Using a fan brush and varnish, cover the surface of the bottle.

The product must dry. Then you need to varnish the bottom.

Cork decoration.
1. For convenience, we install a bottle cap in a plastic water cap. We wipe the cork with acetone.

2. With a sponge dipped in white paint, cover the cork once.

I called the master class "Magic Eggshell" because it seems to me that this word is most suitable for this natural material. Just a shell, but how many different fakes can be made! And the question is no longer the availability of ideas, but most likely whether there is free time ... Therefore, I offer very light and fairly quick Easter gifts in execution. Even kids can do this with a little help from their parents!

To be honest, I spent a little time on my Easter work.

For example, my favorite "wooden roses" in an egg vase.
These "wooden roses" were described in detail and.
Very few of these flowers are needed for such a vase. So there will definitely be no corns. And now is just a very good time for them. Sap flow began in the trees. The chips go "like clockwork", very easily. Already tested on my own experience.

Let's start with the job description. I made an oval on the shell with a drill. But last year I made the same ovals by hand, of course the cut was imperfect. It is described in detail in the "MK on an Easter egg with a" tenant ". But it's not scary, everything can be disguised. To make our vases or egg baskets stable, fill them with plaster. If there are cracks on the shell, they can become even more noticeable. So how gypsum heats up and expands during solidification.Because of this, you should not be upset either, since everything can be beautifully "beaten" with paper, thread, twine, semolina, etc. Dilute the gypsum in a small amount, if not enough, then simply you can add more later. We dilute the gypsum - first we collect a small amount of water and only then carefully pour the gypsum in small portions. We poured a little - stirred, poured a little - stirred so that there were no lumps. We dilute the gypsum to the state of liquid sour cream. We poured our egg molds. If it will be a vase with "wooden roses", then it is better to fill it to the very edge, so that it is more convenient to attach the flowers. The photo shows that they are not completely filled in. It is better to do this if you are just decorating weed, etc.

This egg was cracked. To disguise it, I sprinkled it with semolina, having previously coated the shell with a very thick layer of PVA. After everything was dry, I coated it with another layer of PVA for reliability. Poured plaster. Since I did not yet know what would be there, I did not fill it completely. Plans and ideas were born on the go and had to make changes along the way. I thought that it would be difficult to glue in the "suspended state", but everything turned out to be very simple. We glue everything with hot glue or, as they call it, a glue gun. We glued the first flower and wait for the glue to harden a little. On the subsequent "wooden roses" we apply glue in a semicircle so that they stick not only to the shell, but stick together. Since this is very important for the strength of our bouquet. We glued the first row, glue the second in a checkerboard pattern, also not sparing the glue.

I got two rows and one flower in the middle. In the end, when I glued everything, I realized that I didn’t like how my vase looked from below. I also decided to insert “wooden roses” into the gaps below, but I already cut their sharp ends so that everything was on the same level.

I masked the small gaps between the flowers and the glue protruding in some places with dry moss. Below is my stand-string for a vase. It is enough for the vase to stand steadily. I didn’t even expect that I would like this egg-vase so much. One evening she flooded all my testicles, looked where the cracks had gone. Disguised them and left to dry until the next evening. The next evening, she already registered all my testicles at once.

How to make such an Easter egg house is written This is the link I had in mind before. I used natural materials in the design. Inside, everything was properly coated with PVA glue and after that she placed all her beauty there. It is very convenient to work with tweezers, as everything is very tiny.

In order to place everything stably in the "egg-nest" we pour gypsum as shown in the photo below, not completely.

We properly coat everything inside with glue, the protruding shell too, and decorate as we like. Due to the fact that gypsum is poured into the egg, it stands steadily. If there is no gypsum, then you can use plasticine inside for stability. But then you need to precisely strengthen your shell in any way - glue it with paper, cord, etc. And after that already place well-mashed plasticine inside.

The easter bunny egg looked terrible at first, with cracks and uneven cut edges everywhere. I had to mask the shell with twine. The twine was also glued on PVA, starting with an oval and not completely on the bottom.

The egg with pink flowers is made according to the same principle that I described earlier. I glued the egg with chickens already for beauty with music paper.

And this is almost all beauty.

A large egg sprinkled with shells, also glued on PVA.

I decided to make another hare, but in eco-style. Lined with moss. I saw a panel on the Internet in this regard. I made my changes and now I have the correct Easter Bunny. Made by the way according to the same drawing.

Musical eggs also really liked to make! Moreover, I was lucky and I bought old notes at a German flea market, my happiness knew no bounds ... To make it easier to stick, I naturally tore the paper into small pieces. The paper was soaked in water to make it soft. After the paper was well soaked in water, it was laid out on a newspaper to remove excess moisture. And glued on a well-lubricated PVA area. I helped myself with a toothpick. I rolled a toothpick over a piece of paper, expelled bubbles and reduced wrinkles in this way. It's like rolling dough with a rolling pin. You can’t achieve such smoothness with your hands, it’s been tested on personal experience. Therefore, it is important that the paper is wet. So it is much softer and more elastic and it is easy to stick it.

The basis of the wreath is polystyrene foam (purchased). You can even cut a flat ring out of cardboard. Looks good too, check it out! The shell was painted with acrylics. I glued it on with PVA.

And you can also make candles. MK by candles is located.

How to paint "wooden roses" I told

Decoupage on eggshells. Master class with step by step photos

Master class with a step-by-step photo “Decoupage on eggshells”

The master class is addressed to primary school teachers, educators, teachers of additional education, middle and older schoolchildren, parents and all those who like to create with their own hands.
Performed: Lapteva Svetlana Khristyanovna, teacher of the state budgetary institution of the Novosibirsk region "Social and rehabilitation center for minors", Tatarsk
Purpose: gift, interior decoration.
Target: making a picture using decoupage technique on eggshells.
Tasks:
- to acquaint with the technology of making work in the technique of decoupage on eggshells;
- cultivate artistic taste and creative attitude to work, perseverance in achieving goals, accuracy.

Decoupage is one of the decoration techniques for different surfaces. Using this technique, you can create exclusive interior items, dishes, vases, planters, photo frames, decorate clothes, make fashion accessories yourself and do much more as far as your imagination allows. Decoupage is an ancient technique that has become fashionable again in recent years.
Decoupage on eggshells gives the surface of the product an unusual texture and volume.
There is nothing super complicated in the manufacturing technique, but due patience is required.

To do the job you need:
- frame without glass;
- water-based acrylic paint;
- eggshell;
- PVA glue;
- a napkin with a pattern;
- scissors;
- brush;
- toothpick.

Work must begin with the preparation of the shell. We wash the shell of a fresh egg and leave it in water for 2 hours.

We remove the film located on the inside, after which we let the shell dry thoroughly. The shell will become more fragile and there will be no smell.

We take the shell, break it into not very large pieces and with the help of PVA glue, with the concave side inward, we begin to stick it on the cardboard from under the frame. Let's start from the corner.

Shell fragments, as well as the distance between them, can be large or small at your discretion.

Gradually fill the entire space completely. The base is done, we leave our work until the glue is completely dry.

The shells are different colors. Now we need to make it monotonous. We take white acrylic and cover the resulting base twice with intermediate drying paint. When applying paint, you need to pay attention: if the acrylic is thick, then you need to dilute it with a little water. When applying paint, it is necessary to ensure that the gaps between the shells do not “fill in”, the surface does not level out, otherwise the effect of cracks will not be clearly expressed.

We take a simple single-layer napkin. We decide what motifs we will use for decoupage.

Cut out two different motifs along the contour.

We place them on the basis, try on. If necessary, we remove or add something. I cut off a bud from the top flower, as it turns out an overlay when combining the second motive.

We take the top motive of our work, place it in the place we need, drip PVA glue into the center and glue it to the base. Glue from the center to the edges to remove air bubbles or wrinkles.

You need to work very carefully, as the napkin is very thin and can easily tear.

Let's try the second motive.

Glue it carefully.

We leave the work until the glue has completely dried and frame it.

I made the frame more fun using the decoupage technique.

And this work is done in a similar way, only the eggshell is glued in smaller pieces.

Hope my tutorial is helpful!

6292 0 0

Bottle decor - 5 best ideas for creating a small piece of art

If after any festive event you still have a beautiful glass bottle - do not rush to send it to the scrap, believe me, it will still come in handy. For example, it can make an excellent vase or just an original accessory that decorates the room. I will tell you below how to create a unique bottle decor with your own hands without any special financial costs.

How to create an original and unusual bottle?

It seems to me that decorating is good for absolutely everyone. This is both a way to create a stylish little thing without spending money on expensive materials (you can decorate with everything that comes to hand), and an opportunity to feel like a real artist, showing all your imagination to decorate glass. In addition, it is a great soothing and peaceful pastime.

I have selected some of the simplest options for decorating bottles, which even those who have never done hand-made can easily cope with. About them below.

Idea 1. Salt

When I said that you can decorate a bottle with your own hands from almost everything that is in the apartment, I was not joking. Did you know that regular kitchen salt is a great decorating tool? How best to use it - now I'll tell you.

There are two options for decorating glass products with salt. I will share with you both.

Method 1

For this option you will need:

• salt;
• the bottle itself
• heat-resistant dishes;
• fork and sieve;
• kitchen funnel;
• acrylic paint.

Mix the salt with the paint of your loved one and knead the resulting slurry well with a fork. In a heat-resistant dish, send the mixture to an oven preheated to 100 degrees for about an hour.

After the allotted time, remove the bowl, knead the salt again with a fork and sift it through a sieve. Thus, you will get, as it were, small crystals of colored sand. Make several different types of mixtures by changing the color of the paint.

To make your craft look even more original, feel free to combine and mix shades with each other, thereby creating an unusual color scheme.

With the help of a funnel, start adding salt one by one, alternating shades in layers. After filling the vessel to the top, simply cork it with a decorative stopper and put it in a conspicuous place.

Method 2

Another easy way to decorate a bottle with salt involves using regular rubber bands and white paint. The only condition is that their width should be more than 5 mm.

Wrap a few rubber bands on the bottle in random order, cover the glass with a layer of paint. After it dries, treat the surface with glue. Sprinkle a sufficient amount of salt on a sheet of plain paper and, as it were, roll the accessory in it.

Make sure that the salt evenly covers the product, then remove the gum. As a result, you will get a fabulous decorative bottle, literally covered with a layer of snow. This decor option will be a wonderful decoration for the New Year holidays or for those who miss winter.

You can do without the use of elastic bands - then the impromptu "snow" will cover the glass in an even layer.

Idea 2. Decoupage

This decorating method is a bit more complicated than the previous one, but the effect is really amazing.

So, in addition to a beautifully shaped bottle, you will need:

• acrylic paint in white and a couple of other shades;
• brushes of various shapes and sizes;
• PVA glue;
• napkin for decoupage with your favorite pattern;
• acetone;
• cotton wool;
• eggshell;
• coating varnish.

The sequence of actions is extremely simple:

1. Clean the bottle from the labels, rinse it and degrease the surface with acetone.
2. With a small piece of sponge covered with white paint, paint the entire bottle except for the bottom with dotted movements. It should be treated after the rest of the surface has dried.
3. After the first layer has hardened, repeat the procedure.
4. Separate the top layer of the napkin with the selected pattern from the other two. Attach it to the surface of the bottle and grease with PVA glue. It is necessary to act very carefully, as the napkin is easily torn.
   It is best to coat the material with a fan brush from the center towards the edges.

1. After that, you need to give the product the desired color. Most often, bottles in the interior have delicate pastel colors, but you can choose any shade you like. Just make sure that it is in harmony with the pattern and does not overlap it.
2. To add relief and volume to the bottle, I recommend using eggshells. It must be thoroughly washed and cleaned of a thin film, then crushed into many pieces of various shapes and sizes.
3. Alternately lubricating the surface area with glue, and pressing pieces of the shell to it, process the entire bottle. Next, you should paint it in the color of the product.
4. After decorating with eggshells, it is necessary to paint over the resulting cracks with a thin brush and a different shade of paint.
5. At the end, treat the product with varnish and enjoy the result.

It takes more time to decorate a bottle using decoupage technique than other methods, however, in the end you will get a unique and stylish vase or decorative element. By the way, you can decorate the neck with beautiful satin ribbons or lacing.

Idea 3. Gypsum

You can create texture and add relief with the help of, what would you think? Gypsum!

Yes, modern craftswomen even with gypsum manage to work wonders.

And let me tell you, the result is worthwhile:

1. Mix gypsum with water, a tablespoon of PVA glue to a creamy consistency.
2. Next, you will need a small fabric flap: gauze, chintz or cotton.
3. Dip the fabric in a plaster solution and attach it to the bottle, giving it a relief texture.
4. Paint the surface with white acrylic paint.
5. Next, we proceed in the same way as I described in the previous section on the decoupage technique. Attach the selected pattern and process it with glue.
6. We paint the bottle in the desired color and wait for it to dry. After we process the edges of the formed folds with mother-of-pearl and apply a layer of varnish.

Idea 4. Threads

A bottle decorated with threads will add warmth and comfort to your home interior.

It is incredibly easy to make, all you need is threads of any size and color, as well as double-sided tape.

1. Tape the bottle from the neck to the bottom with double-sided tape.
2. Start wrapping the product with thread. Make sure that each new row fits snugly against the previous one and does not form gaps.
3. Feel free to combine thread colors. The brighter the shades, the more original the final result will be.

I also want to note that instead of adhesive tape, it is quite possible to use ordinary PVA glue. Then each thread should be thoroughly moistened with glue and only then applied to the glass surface.

In a similar way, you can create decor with twine. In conclusion, it would be appropriate to decorate the product with cute buttons or beads, gluing them to the material with special glue.

Idea 5. Cereals and pasta

Agree, using pasta as a decorative element is quite an interesting and unusual idea.

To create such a non-trivial decoration, you will also need some peas, cereals, a hot glue gun and acetone.

1. Degrease the bottle with acetone and grease it with glue.
2. Glue peas to the bottom of the bottle, use several types of cereals a little higher for decoration. By combining them, create a pattern on the surface.
3. Divide the bow-shaped pasta into 4 parts. Using a heat gun, connect them into a small flower, use a small pea instead of a core. In random order, glue the resulting flowers to the bottle.
4. As a final touch, paint the entire pattern with gold paint.

Believe me, in the end, no one you know will guess what your stylish bottle is made of.

Results

In fact, I have listed only the most popular and simple options for decorating glass products. You can give a second life to a bottle of wine or champagne with an appliqué, nylon tights, mesh, beads or even toilet paper - all that is at hand.

Decorating glass products is a great way to use all your imagination to the maximum and show all your talents and abilities.

There are eggs in every refrigerator, but most do not even suspect that you can create a real work of art from their shell. By its hardness, many professionals compare it with marble. The surface of a chicken egg is very difficult to scratch. That is why the eggshell mosaic is so highly valued.

Crackle is a technique for creating picturesque paintings from broken shells. In the East, this technique has been used since ancient times. Today, with its help, you can interestingly transform any object. This creates the effect of a cracked lacquer coating. Over the years, this technique has been forgotten. But long-forgotten old can be a great way to decorate your new modern home. Children will also enjoy being a part of this process. Be patient and prepare the source material for creativity.

Egg shell preparation

You can do a lot of things from eggshells with your own hands, but before that you need to prepare raw materials. Of course, it is not necessary to specifically beat eggs for creativity. Just collect the shell after cooking the next meal. For example, you boiled eggs for a salad. Clean the surface and leave the shell to dry. After it is completely dry, it must be cleaned of the white inner film.

It is better to dye the shell immediately, using food coloring. Dilute all available colors in various jars. Dip the egg skins in there. The coloring matter acts on the material for half an hour. The color is rich and even. After staining, remove the future material and lay it out on sheets of paper. Leave overnight to dry completely.

Mosaic from the shell: preparatory work

The eggshell mosaic looks very nice. The execution technique is quite simple. To create it, you need to find durable cardboard. Glue is better to choose PVA brands. To apply it, prepare a few brushes. You will also need a pencil, a stationery knife, varnish and sandpaper.

If you decide not to paint the shell in advance, then prepare acrylic paints. They will have to be applied to the finished canvas. This option is more economical, but requires utmost attention and accuracy. After preparation, you can get to work. Figure out how your eggshell mosaic will look like.

Surface treatment and mosaic collection

Be sure to responsibly approach the preparation of the surface for the future masterpiece. The desired image is applied with a very thin layer of pencil. It all depends on your imagination. If it is difficult to draw on your own, then use modern technologies: select a drawing on the Internet and print it on a printer. Before that, in the graphic editor, mute the colors and outlines.

The finished shell must be crushed into identical pieces. Just lay out the source material on paper and roll over it with a rolling pin. Just do not overdo it: too small pieces are difficult to put on glue. A large shell looks careless, so find the golden mean.

Glue is applied in parts on paper. Only after that, pieces of the shell are applied. It is necessary to start with the largest particles. There should be space between the pieces, but minimal. Making crafts from eggshells is a long, but interesting lesson. If the pieces look ugly, use a clerical knife. With it, you can give the shell any shape. Take your time creating your mosaic.

We decorate a box or a vase with a shell

Start exploring other finishing methods after you have received your first eggshell appliqué. The master class can be found in this article. It doesn't matter what you choose to decorate. The main thing is to prepare the workspace before gluing the egg shell.

The surface of the wooden product must be carefully sanded. After that, a primer is applied. It is better to immediately paint the product in the desired color. Only after completing these points, you can start decorating the little thing. Further, the same points are repeated as in the case of the usual mosaic.

Bottle with eggshell decor

The bottle can be an addition to any interior. The main thing is to decorate it correctly. An excellent option would be an eggshell mosaic on its surface.

1. We find a bottle, wash it and degrease it.
2. To keep the shell well on the glass, you must use a napkin. It is divided into layers and glued to the walls of the vessel.
3. Gently glue the pieces of the shell. After drying, another thin layer of napkin is glued on top of the source material.
4. Next, a primer is applied and its final drying is expected.
5. The drawing is made with paints or using the decoupage technique.
6. Do not forget to fix the finished panel with a layer of varnish. Such a bottle can be put in any room or presented to a loved one.

Here are some egg shell crafts you can do. Be sure to create with your children, they will appreciate this kind of activity.

For the bravest

Girls can experiment with egg crumbs that remain from decorative work. Everyone knows that eggshell mosaic looks good in the interior of the room. But this is not the only way to use this natural material.

All fashionistas watch their nails. Every week they visit nail salons to create another masterpiece. Try at home to make a very interesting effect on your nails.

• treat the surface of the nails and give them the desired shape;
• cover the nail plate with a layer of transparent varnish, now apply crushed eggshell crumbs on the dry surface;
• cover the source material with any color.

Such a manicure will look interesting on your hands. And it's very easy to do it.

This is how you can use an inconspicuous eggshell. Agree, each of these options looks creative and stylish. Experiment and create beautiful things with your own hands. Being original is simple: open your creativity and you will succeed!