If you (or your husband) are planning to engage in a new activity, then you need to submit an application to the (Unified State Register of Individual Entrepreneurs). In this application, list the OKVED (All-Russian Classifier of Types of Economic Activities) codes that suit you:
20.30.1 Production of wooden building structures and joinery. This grouping includes:
- production of wooden products intended for use primarily in construction:
- beams, rafters, load-bearing covering elements;
- doors, windows, shutters and frames for them, etc.
25.23 Production plastic products, used in construction. This grouping includes:
- production of plastic door and window blocks (door leaves and frames, windows and window frames), etc.
45.42 Carpentry and carpentry work. This grouping includes:
- installation of products and structures not made in-house: door and window blocks and frames.
51.53.24 Wholesale trade of other construction materials. This grouping includes:
- wholesale trade in other building materials: sand and gravel, clay, cement, brick, tiles, metal and reinforced concrete building structures and their elements, door and window blocks and other joinery products.
It’s better to enter all possible codes at once, because you can then install windows yourself own production, and sell without installation (for example, to other entrepreneurs), and install ready-made windows. If you don’t take something into account this time, then you will have to write an application again and pay a state fee for making changes.
Further, as you correctly indicated, installation activities plastic windows to the population is considered a household service and has a code according to the All-Russian Classifier of Services to the Population (OKUN) 016108 (this is not OKVED, as you write!). Therefore, this activity is subject to UTII, and after registering new OKVED codes, you need to submit an application to the tax office for registration as a UTII payer (if you have not submitted it before). Thus, the activity of installing plastic windows will be on UTII (from the date of registration of you as a UTII payer).
Until the end of 2013, your production activities will be subject to the general taxation system, because Your old registration as an entrepreneur has not been terminated. Therefore, until the end of 2013 you will have to accrue and. An application for transition to a simplified taxation system must be submitted no later than December 31, 2013, and from 2014 all income received from entrepreneurial activity(except for income from window installation) will be subject to a simplified taxation system.
25.2 Manufacture of plastic products
25.21 Manufacture of plastic plates, strips, pipes and profiles
This grouping includes:
— production of semi-finished plastic products:
- plastic plates, strips, blocks, films, foils,
sheets, etc.
- production finished products made of plastics:
- plastic pipes, hoses and sleeves, fittings for
hoses and sleeves
- manufacture of plastics in primary forms, see 24.16
- production of optical elements from plastics, see
33.40.1
25.23 Manufacture of plastic products used in
construction
This grouping includes:
– production of plastic door and window blocks
(door leaves and frames, windows and window frames),
shutters, curtains, blinds, baseboards, tanks, reservoirs
– production of plastic floor coverings
(baseless linoleum), walls and ceilings, in rolls or
in the form of tiles, etc.
– production of plastic sanitary materials
products: plastic bathtubs, showers, sinks, toilets,
flush cisterns, etc.
– production of prefabricated buildings made of plastics
This group does not include:
- manufacture of rubber products, see 25.1
- production of linoleum and rigid non-plastic
textile-based floor coverings, see 36.63.4
25.24.9 Provision of production services
plastic parts
Home → List of services → OKVED sale and installation of interior doors
Our service department “Portal Service”, where the installation of interior doors is carried out at a professional level on a turnkey basis, building codes and standards. Installation of interior doors in Moscow requires strict adherence to quality requirements, and the company tries to maintain its reputation among customers. Our craftsmen install doors using professional tools and are familiar with the types and features of frames and fittings from well-known manufacturers.
What is OKVED, installation of plastic windows and installation
Service list
We offer - OKVED sale and installation of interior doors, as well as a number of works required for the full functionality of the doors:
- installation of sliding structures that require care and precision;
- installation of door lock and handles;
- finishing services – additions, openings, design of arched openings and portals.
Masters of "Portal Service" have necessary knowledge and experience, so they can install swing and sliding structures high level difficulties, repair and replace worn-out fittings. We have an arsenal of equipment and tools to install the box and material sheet different categories, even expensive products made from valuable wood.
We will help you choose the right fittings for the selected products - platbands, hinges, locks and handles that will complement the style of the room. The craftsmen know how the door works from the inside, so they will ensure competent installation even with a complex opening configuration.
OKVED sale and installation of interior doors - how to order the service?
Calculation of how much it costs to install door structures in an apartment is carried out based on the complexity of the work, the need to perform additional work for preparation or finishing. By contacting managers by phone or leaving a request on the website, you can order a technician to visit the right time for inspection and preparation of preliminary estimates. Only after agreeing on and approving the estimate with prices, we begin to carry out the work.
If necessary, we will help you choose the appropriate door system for the rooms based on the area and the opening of the hinges in a specific direction. Our services are inexpensive, and our goal is an aesthetic appearance and reliability for the period of operation! Installation of interior products with solving complex problems within the capabilities of our professionals!
Prices for work
Home | About the company | Districts | Prices | Contacts | Reviews
Installation of plastic windows okved
How wonderful it is to return home, where a cozy atmosphere awaits you. Updated interior, modern plumbing, high-quality Appliances. The interior is warm and cozy, the installation of okved plastic windows allows sunlight freely enter the premises.
OKVED Production and sale of PVC windows - RegHelp Forum
The life of modern city dwellers is fleeting. It takes quite a long time to get to work. Therefore, I want to spend at least a couple of hours in a house where it is always cozy, warm and comfortable. Beautiful interior, functional kitchen and bathroom. The idyll is completed by inserting cheap plastic windows made to individual sizes. Experienced craftsmen are always ready to carry out measurements and installation at a professional level.
According to the list, installation of okved plastic windows, wide but low windows, angle to pvc windows, help window on the website, finishing windows on the outside with pvc, how to install a pvc window in wooden house video on how to write off materials in the production of PVC windows, Divas windows discounts, how to remove pop-up windows in Google Chrome, calculating the cost of a plastic window online Krasnodar, photo of a winter window.
Constant temperature changes make us think about how to ensure constant warmth in an apartment or house. The weather changes, one day there may be heavy rain and wind, then the bright sun begins to warm up. In order to always keep the room warm and dry, you need to buy a bathhouse window with double glazing. Such structures are quickly installed, easy to clean, and provide excellent protection from bad weather.
— OKVED (http://regforum.ru/forum/forumdisplay.php?f=53)
OKVED (sale of plastic windows) The organization sells PVC windows. We are not a manufacturer ourselves. We work under dealer agreements. We involve third-party briads in the installation. What type of activity needs to be specified in the Charter so that the rate in the Social Insurance Fund for accidents is minimal? Now the rate is 0.9%, but we are not manufacturers and do not deal with installation work. The code is 45.42. production of joinery and carpentry works. I couldn't find anything else acceptable. Please advise. And how to confirm another type of activity in the Social Insurance Fund? Is this problematic? Maybe it can be changed to those that more or less fit from the charter? The charter specifies the following codes: |
| Current time: 13:06. Time zone GMT +3. |
Powered by vBulletin® Version 3.8.7
Copyright 2000 - 2018, vBulletin Solutions, Inc. Translation: zCarot
© 2007-2018 regforum.ru. When using site materials, a (hyper)link is required
Installation of plastic windows okved
How wonderful it is to return home, where a cozy atmosphere awaits you. Updated interior, modern plumbing, high-quality household appliances. The interior of the room is warm and cozy; the installation of okved plastic windows allows sunlight to freely enter the room.
OKVED codes for sale and installation of windows
The life of modern city dwellers is fleeting. It takes quite a long time to get to work. Therefore, I want to spend at least a couple of hours in a house where it is always cozy, warm and comfortable. Beautiful interior, functional kitchen and bathroom. The size of the window pits, made to individual sizes, completes the idyll. Experienced craftsmen are always ready to carry out measurements and installation at a professional level.
According to the list, installation of plastic windows okved, window to the miniature garden of the prince adult manga, how to adjust plastic windows for the winter, bars on windows in St. Petersburg, plant for the production of plastic windows Khabarovsk, Khabarovsk windows of growth, lg windows in Tver, plastic windows circle, how to sheathe roof window, plastic windows trocal innonova 70 m5, windows in St. Petersburg Ozerki.
Constant temperature changes make us think about how to ensure constant warmth in an apartment or house. The weather changes, one day there may be heavy rain and wind, then the bright sun begins to warm up. To always keep the room warm and dry, you need DIY window decorations for curtains. Such structures are quickly installed, easy to clean, and provide excellent protection from bad weather.
We invite you to use a ready-made set of OKVED codes compiled for the sale and installation of plastic windows, doors, as well as delivery. The set of codes is suitable for both LLC registration and individual entrepreneur registration. Codes have been updated according to the new classifier!
If necessary, in the case of a more expanded scope of activity of your company, you can independently supplement it with other codes corresponding to the type of activity of your future company.
Sets of OKVED codes for various types of activities for LLCs and individual entrepreneurs
- 47.19 Other retail trade in non-specialized stores
- 43.29 Other construction and installation works
- 43.32 Carpentry and carpentry work
- 43.32.1 Installation of doors (other than automatic and revolving), windows, door and window frames made of wood or other materials
- 43.34.2 Glass production
- 43.39 Production of other finishing and finishing works
- 43.99.7 Work on assembly and installation of prefabricated structures
- 43.99.9 Specialized construction work, not included in other groups
- 46.19 Activities of agents in wholesale trade of a universal assortment of goods
- 46.73 Wholesale trade in timber, construction materials and sanitary equipment
- 46.73.6 Wholesale trade of other construction materials and products
- 46.74 Wholesale trade of hardware, plumbing and heating equipment and accessories
- 46.90 Non-specialized wholesale trade
- 47.52 Retail trade of hardware, paints and varnishes and glass in specialized stores
- 47.52.3 Retail sale of glass in specialized stores
- 47.52.7 Retail trade in building materials, not included in other groups, in specialized stores
- 47.52.73 Retail trade of metal and non-metallic structures in specialized stores
- 47.52.74 Retail trade in prefabricated wooden buildings in specialized stores
- 47.52.79 Retail sale of other building materials, not included in other groups, in specialized stores
- 47.91 Retail trade by mail or via the Internet information and communication network
- 47.99 Other retail trade outside shops, stalls, markets
- 49.41 Activities of road freight transport
- 49.42 Provision of transportation services
- 52.10 Warehousing and storage activities
On a note
To carry out your activities, you must select OKVED codes. There may be several of them, but there is only one main one! The OKVED classifier contains codes under which your activity will be required to have licensed status and you will be required to obtain the appropriate license. Therefore, when registering your company and choosing the main type of activity, do not forget to review
Set of OKVED codes - Sale and installation of plastic windows
We invite you to use a ready-made set of OKVED codes compiled for the sale and installation of plastic windows, doors, as well as delivery. The set of codes is suitable for both LLC registration and individual entrepreneur registration. Codes have been updated according to the new classifier!
If necessary, in the case of a more expanded scope of activity of your company, you can independently supplement it with other codes corresponding to the type of activity of your future company.
47.19 Other retail trade in non-specialized stores
43.29 Other construction and installation works
43.32 Carpentry and carpentry work
43.32.1 Installation of doors (other than automatic and revolving), windows, door and window frames made of wood or other materials
43.34.2 Glass production
43.39 Production of other finishing and finishing works
43.99.7 Work on assembly and installation of prefabricated structures
43.99.9 Specialized construction work, not included in other groups
46.19 Activities of agents in wholesale trade of a universal assortment of goods
46.73 Wholesale trade in timber, construction materials and sanitary equipment
46.73.6 Wholesale trade of other construction materials and products
46.74 Wholesale trade of hardware, plumbing and heating equipment and accessories
46.90 Non-specialized wholesale trade
47.52 Retail trade of hardware, paints and varnishes and glass in specialized stores
47.52.3 Retail sale of glass in specialized stores
47.52.7 Retail trade in building materials, not included in other groups, in specialized stores
47.52.73 Retail trade of metal and non-metallic structures in specialized stores
47.52.74 Retail trade in prefabricated wooden buildings in specialized stores
47.52.79 Retail sale of other building materials, not included in other groups, in specialized stores
47.91 Retail trade by mail or via the Internet information and communication network
47.99 Other retail trade outside shops, stalls, markets
49.41 Activities of road freight transport
49.42 Provision of transportation services
52.10 Warehousing and storage activities
Today on construction market The competition for plastic windows is off the charts, but the number of consumers is steadily growing exponentially. It is for this reason that opening your own business selling, installing and even producing plastic windows is a very real prospect. In order to register as a seller of PVC window systems, you need to know OKVED plastic windows.
OKVED: installation of plastic windows and their sale
You can use OKVED data if you decide to register yourself as individual entrepreneur. If you are planning to create another form of ownership - LLC, then the information presented will also help you. It is important to understand that if you are determined to increase your powers, then OKVED production of plastic windows will need to be supplemented.
- 45.42 – includes carpentry and carpentry work;
- 52.46.7 – provided for retail trade in any building materials, provided that they are not included in any other groups;
- 52.46.73 - intended for retail trade in metal structures, as well as non-metallic ones, etc.
- 45.45 – includes the production of any finishing and final work;
- 45.44.1 – associated with the production of work with glass.
Important! Please note that when choosing OKVED, you will have only one main one. All others are considered optional.
If you need to install plastic windows, OKVED code will be required 45.42. It is worth understanding that installation and sale are usually closely related, so OKVED (sale of plastic windows) will be the same: 45.42.
Attention! If you decide to do only installation, we recommend making OKVED the main one: retail plastic windows. Otherwise, your type of activity will be considered construction and then you will have to purchase a license.
OKVED: production of plastic windows.
In order to carry out the production of plastic windows, the OKVED code will require not one, but several:
20.30.1 this code is required for the manufacture of all kinds of carpentry and wooden products. It includes:
- production of wooden products necessary in construction;
- production of beams, load-bearing elements of coverings, windows, frames for them, doors, etc.
25.23 Production of plastics needed in construction. This includes:
- production of windows and doors from plastic (window and door leaves and frames), etc.
45.42 Carpentry and carpentry work. This may include:
- installation and placement of products and structures not manufactured in-house;
51.53.24 Wholesale trade in various building materials. To such building materials may include: sand, gravel, brick, cement, various carpentry, tiles, window and door blocks.
Attention! Try to enter all the codes even if, for example, you do not plan to carry out other types of work in the present. In the future, as production expands, you will need to rewrite the tax application again. And then pay an additional state fee, so enter as many necessary codes as possible in advance.
Other OKVED codes
Let's assume that you are installing and selling not only PVC windows, but also metal-plastic ones, then you should take into account the following types of codes:
- 52.46.7 sale of building materials
- 52.46.73 Trade in metal and non-metallic structures.
In any case, when choosing OKVED, if you are not confident in your abilities, you can always consult with a lawyer who will tell you what type of activity to do as your main one. It is possible to do this yourself if you plan everything in advance. Decide for yourself what your business will be like. Will you engage in production yourself or become a dealer of any company, or maybe you just decided to start installing windows you have already purchased.