Origami flowers made from paper for children. DIY origami paper flowers. Interesting gift idea Roses with sweets

Every woman is pleased to receive flowers as a gift. But it will be doubly pleasant if these flowers are made with your own hands. You can make tulips from paper. It's not difficult at all. Moreover, paper flowers retain their amazing appearance for a long time and do not require care.

Some people know quite obviously, others simply feel intuitively that the lotus flower is a symbol of the East. And, like everything in the East, it is also very beautiful, interesting, and even mysterious. Therefore, it is absolutely not strange that the lotus was embodied by origamists. And today we invite you to immerse yourself a little into oriental symbolism and add this to your collection. beautiful flower.

Today we invite you to collect a lily flower from paper. And we would like to immediately draw your attention to the fact that, in comparison with other origami lilies, this particular flower has great elegance. At the same time, it is created quite simply, and by moving on to the next master class, you can see for yourself.

At the beginning of spring, people are primarily pleased with flowers such as crocuses. They surprise us with bright and joyful petals on the snow that has not yet completely melted. By the way, the ancient Greeks called this flower the flower of happiness, and dedicated it to the lovely young goddess Eos. Don’t ask again what all these preludes are for, you already guessed that today we will teach you how to create crocuses from paper.

We all know that the rose is the queen of flowers. But at the same time, it is also dangerous flower, because the sharp thorns may well prick your hands, and then all the pleasure from the flower presentation will come to naught. And to prevent this from happening, we recommend that you create paper roses with your own hands, which, moreover, will not wither a few days after giving.

Sweet spring, or Gentle spring - this is the name of the kusudama that we invite you to fold today. The author of this amazingly beautiful craft is Natalya Romanenko, and she was happy to share with everyone the assembly diagram for such an origami ball.

The floral world attracts the attention of not only nature lovers, but also origami creators. And you can see this with your own eyes by simply scrolling through the information about the art of origami and noting how many colors origami masters have created throughout its history. And today we invite you to join the flower lovers and create a beautiful rose.

Today we bring to your attention a lesson, supported by photo instructions, on creating simple and small paper flowers. Such crafts are perfect for decorating your home for the holiday, for setting the table and for decorating gifts. However, what to do with them is up to you, our job is to teach you how to create such beautiful flowers.

The rose pattern is not very good complex circuit. With this diagram you can begin to get acquainted with this not simple art. First of all, you need to stock up on a sheet of paper and tracing paper. Next, you need to draw or print a diagram of the pattern.

Come on, dear guys, remember how long ago you gave your girlfriend flowers? If this question has put you in a difficult situation, then this publication will certainly help you. After all, today we invite you to create a beautiful modular flower with your own hands.

In the section "Flowers" presents a wide variety of incredibly realistic paper flower options. Easy and more complex options will be of interest to both beginners and more experienced craftsmen who have mastered the origami technique. And if you doubt your abilities, then you should remember this:

- Origami flowers are a technique accessible to everyone.

It is a mistake to think that origami is a difficult technique that not everyone can master. This is wrong! Having in front of you our video tutorials and origami color schemes presented in each proposed product option, you can easily create such beautiful origami flowers as "Bell" or a rose from Stefan Weber or an elegant lily from triangular modules.

- Origami flowers are an original and valuable gift.

A beautiful souvenir, created with love with your own hands, will become the most an expensive gift for mom, sister's friend or beloved. And if fresh flowers lose their beauty over time, capture it with a luxurious interweaving of paper folds that can perpetuate the feelings invested in them.

- Origami of paper flowers is a fascinating hobby.

Modular origami flowers can bring a lot of positive emotions to children and adults. The hobby of creating flower arrangements from paper will help children better develop hand motor skills and spatial thinking, which will invariably have a positive effect on their studies at school. Parents will find origami useful when decorating the interior, creating a unique design of decorative elements that will bring a piece of comfort to any home.

To simplify execution, we presented origami in each version detailed description of this craft. You can also add ready-made flowers to any composition from the category "Plants", creating a unique colorful bouquet or an original flower tree.

We wish you to discover something new in performing the technique of origami flowers from paper, and also find something useful in our section "Publications", where we have selected the most interesting and useful topics.

Making figures from multi-colored modules will diversify leisure time and become a common interest for family members. Even a novice master, having mastered the basics of origami, will be able to surprise others with exclusive crafts.

Origami is the oriental art of creating decorative figures from paper, which includes several types. Modular origami is its integral part.

Types of origami:

Name	Description
Modular	The craft is assembled from parts of the same size, which are folded in a certain way. Figures are obtained by nesting modules into each other. Glue is not used when creating them, but for strength in complex models, adhesive connections are allowed.
Simple	The figure is made from one sheet of paper. Suitable for developing fine motor skills in children.
Wet folding	When working, the paper is moistened with water, which allows you to create crafts with smooth lines. Thick paper treated with water-soluble glue is suitable for this technique.
By pattern	Folding the figure according to the diagram. The drawing shows all the folds of the future model, special symbols. A convenient way to make complex crafts

There are at least 10 types of origami modules. Flat ones are used to create mosaics; three-dimensional parts are used to form balls and shapes. Modules in the shape of a trefoil and triangle are common. Pyramid-shaped blanks are used to create kusudama - bright balls.

Materials for work

The paper for modular origami is chosen to be durable, not glossy, to avoid unnecessary slipping. The paint on the folds should not rub off.

office white and colored, quite durable and rough;
stickers, writing pads;
Kami – Japanese origami paper;
magazine matte;
wrapping;
gift (packaging);
foil.

Colored school paper is not suitable for work; it is thin and turns white on the folds. Cardboard modules do not roll well. Newspapers are suitable for beginners, they are not durable and turn yellow over time.

Preparing for work

Before starting to create modular figures, they stock up on paper of the required colors and make modules. Triangular modules are folded from rectangular sheets with an aspect ratio of 3:2.

Manufacturing:

The A4 sheet is folded in half, then 3 more times. There were 32 rectangles on paper. Modules of the popular 1/32 size are assembled from them. If larger parts are needed, leave 8 or 16 parts.
Cut the paper into rectangles with scissors or a stationery knife.
Fold the part lengthwise, then widthwise. There is a control line in the middle.
Fold the sides of the rectangle towards the middle, as when assembling an airplane, and turn the workpiece over to the other side.

The extreme corners of the parts protruding from below are bent upward, to the base of the triangle.
The lower part of the workpiece is raised. The result is a triangle.
Bend the triangle along the midline. The module is ready.

The piece has 2 corners at the front and 2 pockets at the back. With their help, the modules are connected to each other.

Module assembly technique

When folded, the module is a straight triangle. The hypotenuse is called the long side, the leg without pockets is called the short side.

The configuration of the craft depends on the method of connecting the modules:

The corners of one triangle are respectively inserted into the pockets of the other. So, from several parts, a flat strip is obtained, which is used to make the tails, necks, and legs of the figures.
The top of one triangle is inserted into the pocket of the second, then the top of the second is inserted into the pocket of the third. The connection is used to create long chains, the basis of figures.

To connect 3 modules, the adjacent vertices of two parts are inserted into the pockets of the third.
The rows are obtained by stringing a triangle onto adjacent corners of the parts of the bottom row. Depending on the scheme, the module is put on 1, 2 or 3 vertices.

The long side up method means that the module is put on with the hypotenuse forward, towards the assembler. Short side forward means that the triangle is strung with the leg forward. The usual method for assembling rows is with the long side facing up.

Paper flowers

Modular origami for beginners is mastered by creating simple shapes. Using this technique, you can recreate a flower or come up with your own image of a plant. Such crafts are made from modules measuring 1/32 so that the figure turns out graceful and close to the original.

They decorate the holiday table and are given as gifts for March 8th or birthdays. Large modules are used to make large flowers that decorate the room for a celebration.

Lotus or water lily

The lotus, made using the modular origami technique, consists of 6 green leaves, on which a two-color bud with a core is placed. For work, 240 pink, 126 dark pink, 50 yellow and 318 green triangles are prepared.

Modular origami for beginners: step-by-step making of a lotus

Procedure:

They start by making diamond-shaped leaves. 2 elements are inserted into the first green module, 1 triangle is added in the remaining rows. After a strip of 7 triangles in each subsequent row, their number is reduced by 1. To connect two leaves, 4 additional modules are used, which are inserted with the reverse side. All 6 pieces are fastened together.
Similarly, 6 bud petals are made from pink triangles; the longest row of the workpiece consists of 5 modules.
The finished parts are laid out in a row and the petals are connected with the first dark pink module in the middle. Then they fill the rest of the space and close the two-color stripe into a ring. 3 rows are laid along the bottom of the flower, alternating light and dark triangles.
The yellow elements are used to make a core, 5-6 pieces in a row. The bud is placed on the leaves and the middle is inserted into it.

The bud can be made variegated or plain, and rows of dark or light modules can be laid along the edge of the leaves. If the core is removed from the flower, the lotus will turn into a vase.

Lily

A variegated royal flower will be made from 230 orange and 50 brown blanks. The lily consists of 5 petals; long stamens made of paper or other materials are inserted in the middle of the flower. The stem is formed from 3 cocktail tubes.

Modular origami for beginners: step-by-step making of a lily

Procedure:

All petal modules are inserted into the pockets with the long side. The first 3 rows are made from orange modules, gradually connecting 2, 3 and 4 parts.
Add a brown element to the 4th row - 1 orange, 1 brown, 1 orange triangles. Along the edges, one corner of the modules of the previous row is left free.
The 5th row consists of 4 orange modules, the 2 outer parts are put on, capturing the free corners from the 3rd row so that the side of the petal is smooth.
The 6th row is assembled from 5 modules: orange, brown, orange, brown, orange. Row 7 is assembled from 6 orange parts.
In the 8th row, 4 orange and 3 brown modules alternate, starting and ending the row with yellow elements.
The 9th row consists of 6 orange triangles; to decrease in this and the next rows, the outer modules are placed on the 3 tops of the parts of the 8th row.
In the 10th row, 3 orange and 2 brown parts are placed in a checkerboard pattern.
Row 11 is formed from 4 orange modules, row 12 - orange, brown, orange elements. The petal is finished with rows of 2 and 1 modules.
The finished petals are bent to resemble a living flower and connected at the base with brown parts. A wire is inserted into the stamens and passed through the middle of the lily.
For the stem, 3 tubes are secured with wire from the flower stamens and pasted over corrugated paper. Leaves are placed on the stem.

A delicate lily will be made from white and pink modules. A flower made from details in contrasting shades looks original.

Narcissus

To make a daffodil, you need 16 white modules and a 2.5 cm wide strip of double-sided yellow paper for the core. A cocktail tube is used as a stem.

Modular origami for beginners: step-by-step making of a daffodil

Procedure:

Lay out 8 modules in a circle, with the short side towards the middle and attach the remaining 8 triangles to them. To do this, the corners of two adjacent parts of the 1st row are inserted in a circle into the pockets of the same module of the external chain. It turned out to be a two-row ring, these are petals.
One side of the yellow paper strip is cut into fringe, rolled into a tube and lightly sealed. The finished center is inserted into the head of the daffodil.
The cocktail straw is wrapped in a strip of green corrugated paper and glued, 1 cm does not reach the edge of the tube.
The free end of the tube is cut into 5 parts, coated with glue and inserted into the flower.
A strip of corrugated paper is glued in half, allowed to dry, and a long sheet is cut out and glued to the stem.

Several daffodils will make a spring bouquet for your mother, grandmother or sister.

Rose

The rose is made from 95 modules and a cocktail straw. You can take juice tubes, then you need to insert them one into the other to lengthen them.

Procedure:

The bud is collected from top to bottom, gradually narrowing the figure. Rows 1, 2 and 3 consist of 15 triangles. Elements of the 2nd row are put on with the long side up, and 3rd rows - with the short side up. A three-row ring is formed, this is the top of the flower.
The 4th row continues in a circle, the triangles are put on the 3 corners of the module of the previous row. The 5th, 6th, 7th rows consist of 10 elements connected to the previous row in the usual way– 1 module per 2 adjacent ends.
10 modules are inserted into the lower part of the flower, like petals. For reliability they are glued.

The straw is wrapped in a strip of paper in a spiral and sealed. At the top of the stem, a thickening is formed from paper, equal in diameter to the hole in the rose. Leaves are cut out of paper and glued to the stem. Coat the top of the stem with glue, insert it into the bud, and press for a few seconds.

White Rose

A snow-white flower will be made from 110 modules measuring 1/32. Regular office paper will do.

Procedure:

Assemble a ring of 3 rows of 18 modules each. In rows 1 and 3 they are placed with the short side forward. Parts of row 2 – long side up.
In the 4th row, each element is put on 3 tails of the parts of the bottom row. Then assemble 2 rows of 12 pieces and 1 row of 12 triangles, short first.
In the last row, 8 triangles are placed with the short side facing out, inserting them into the 3 corners of the previous strip.

The bud is ready, the cocktail tube is wrapped in a strip of paper, and the cut out leaves are glued on. The rose is placed on a stem coated with glue.

Swan

Modular origami for beginners will be of interest to people who want to create three-dimensional figures of birds and animals. To make a swan you will need 458 white modules and 1 red one for the beak. A large figure will be made from triangles measuring 1/16. For strength, the tops of the parts are lubricated with glue.

Procedure:

Assembly begins with the body of the bird. In the 1st row, 30 triangles are placed with the long side outward; 30 modules of the 2nd and 3rd rows are put on them with the short side outward. The corners of 2 adjacent modules fit into the pockets of one triangle of the next row. The strip is closed into a ring and the 4th and 5th rows are laid in the same way. The figure is turned inside out, resulting in a bowl-shaped piece. Add a 6th row of 30 pieces.
The wings are formed from the 7th row. Leave 2 tops of adjacent triangles free - this is the place for the neck. 12 modules are put on to the left and right of the gap. There is a free area at the back for the tail. The wings are assembled, for which in each subsequent level the number of parts is reduced by 1. The last row consists of 1 module. The wings are arched to create the effect of a bird taking off.
The tail is made similarly to the wings, the number of modules in the rows is reduced to 1 triangle.
The neck consists of 31 pieces; it is assembled from the beak by inserting the corners of one module into the pockets of another. To prevent the beak from looking double, it is glued. During the assembly process, the bird's neck is bent. The eyes are glued next to the swan's beak and the neck is inserted into the space between the wings.

If you make a beak and a crown from golden paper, you will get a swan princess. A black bird with wings edged with white stripes and a butterfly on its chest looks presentable. Children love colorful swans.

Watermelon

To create a watermelon slice you need 114 red, 66 green, 17 white and 16 black blanks. They are inserted with the long side up, except for the first row - its parts are placed with the short side up.

Procedure:

Start assembly with 15 green modules. Rows 2, 3, 4 are assembled from green triangles of 14, 15, 16 pieces.
In the 5th row: 2 green, 13 white, 2 green. 1 green triangle is placed at the beginning and end of the 6th row, 1 white triangle is inserted next to them, the middle of the chain consists of 12 red modules. Row 7 begins and ends with 1 white element, with 13 red elements placed inside.
Row 8 consists of 14 modules, red ones alternate with black ones. Row 9 is formed from 13 red ones, the following rows are reduced by 1 module.
In rows 10 and 12, red and black parts are placed sequentially, according to the pattern. Row 11 and 13 to 21 are assembled from red modules. The last 21 row consists of 1 triangle.

Hare

To make a hare in a sweater, fold 402 white and 120 multi-colored modules. For a figure without clothes, take 520 parts of the same color.

Procedure:

For the first 3 rows, take 24 parts each, form a three-row strip and close them into a ring. Turn it inside out, resulting in a workpiece in the form of a wide vessel.
The 4th row is assembled from 24 colored parts - the beginning of the sweater. They are not inserted all the way, but are secured higher and the lower corner is moved forward to add volume. 4 more lanes are laid in the same way.
For 1 row of the head, take 24 triangles and put them on with the short side forward. In the second row, 6 parts are added. In this and the next 6 rows, the parts are strung with the long side up.
The ear begins to be assembled from 6 triangles. They are connected to the last row of the head with the short base forward. Row 2 consists of 5, row 3 – of 6 parts. The outer triangles are strung on the last vertices of the 2 lower modules. This is how 7 rows are assembled. Row 8 consists of 5 triangles, the outer parts are placed on the 3 tops of row 7. Row 9 – 4 triangles, 2 middle ones are placed above the 2 outer ones. They skip 2 head modules and assemble another ear.

Cut out and glue on the hare's eyes and nose, collar and bow tie. Arms are cut out of cardboard and attached to the sides of the body. If you cut a strip of paper into a fringe, twist it onto a pencil and glue it, you get bangs.

Penguin

Modular origami for beginners allows you to practice this technique with early age. For example, a child can assemble a penguin. To assemble this bird, take 129 black, 1 orange and 76 white modules.

Sequencing:

Row 1 is assembled from 10 black and 6 white parts, installed with the short side up. In the 2nd row there are 7 white and 10 black, they are placed with the long side up.
In the 3rd row, 6 white and 10 black blanks are put on with the long base up. Roll the three-row strip into a ring and form a bowl.
In the 4th row - 9 black and 7 white, in the 5th row - 10 black and 6 white, in the 6th row - 7 white and 9 black triangles. Row 7 - 10 black and 6 white elements.
Row 8 - beginning of the head, 9 black and 7 white parts. In the 9th row there are 10 black and 6 white parts. In the 10th row there are 9 black and 7 white blanks.
Row 11 – 10 black and 6 white, the next strip is similar to row 10. In the 13th row there are 11 black modules. The top of the figure is compressed.

An orange beak module is inserted in the center of the head, and black triangles - wings - are placed on the sides. Cut out and glue the penguin's eyes.

Owl

A small two-color owl is assembled from 62 white, 7 orange, 157 blue and 2 black modules.

Procedure:

Row 1 – 13 blue and 5 white triangles, short side first. White blanks are placed between blue ones, this is the beginning of the chest. Row 2 is formed from 6 white and 12 triangles with the short base forward and completes the ring.
In the 3rd row, 5 white and 13 blue parts are placed with the short base forward.
In rows 4, 5, 6, the parts are placed with the long base facing up. Row 4 – 6 white and 12 blue, Row 5 – 5 white and 13 blue, Row 6 – 6 white and 12 blue triangles.
Row 7 is laid from 5 white and 13 blue parts with the short base forward.
In the 8th row, 2 central white modules are placed with the short side forward, 4 white and 12 blue - with the long base forward.
In the 9th row, an orange triangle-beak is inserted in the center of the white area, to the right and left of it are 2 white and 13 blue parts.
In the 10th row, 2 white triangles are placed in the middle, 1 white and 1 black element are inserted on either side of them, and continued with 12 blue triangles. In the 10th and subsequent rows, the triangles are put on with the long side forward.
In the 11th row, 1 blue element is placed above the beak. On both sides of it, 2 white modules are laid. The row ends with 13 blue back triangles.
The 12th row consists of 8 blue elements located in the center of the figure. To make the ears, 3 blue parts are hung on the sides of this row. Then 1 blue triangle is placed on them.

From below the bird is inserted 2 paws, consisting of 3 orange triangles. At the back are attached 2 blue parts - a tail. The wings are assembled from 3 modules and attached to the sides of the owl.

Crane

To make a white bird with black plumage and a black neck, you need 118 white, 84 black and 9 red modules. The parts are glued together for strength.

Procedure:

Assembly begins at the base of the neck. 2 white parts are inserted sequentially, with corners into the pockets. Row 2 consists of 2 modules, row 3 – 1 triangle.
Wings are formed to the left and right of the base, 3 rows of 10 modules each. The body is filled, alternating 1 and 2 parts. The tail rows consist of 4, 3, 2 and 1 triangles. To obtain plumage, 2 rows are laid along the wings, and 8 black elements along the tail. The edges of the wings are decorated with three rows of 3 black parts.
The tail is folded from black triangles according to the scheme 3, 2, 4 and connected to the body of the bird.
The neck consists of 11 black parts, inserted one into another. At the end there is a white module turned in the other direction - this is the head. Add a red triangle - beak. Attach the neck to the crane in the designated place.
The legs are assembled from 3 black, 5 white and 4 red modules. The lower red part is put on the other side for stability.

Eyes are glued or painted on the crane. Decorate the figure with a bow and a hat.

Rooster

The rooster craft is made from 11 yellow, 34 red, 185 orange, 66 green modules measuring 1/32 and 4 red modules measuring 1/64. To prevent the figure from falling apart, the joints of the blanks are glued.

Procedure:

Connect 3 rows of 11 orange parts, roll them into a ring and lay another 7 rows. To form the chest and neck, add a row of 6 triangles, then continue with the pattern 5-4-5-4-3-4-3-2-3-2-3-2-3-2-1-2-1. The neck is compressed and arched.
For the wings, green modules are assembled in rows of 3-4-3-2-1-2-1 pieces. The legs are made from 3 yellow pieces, dropping the corners into the pockets of the next triangle. Add 2 modules, which are inserted with both tops into 1 pocket of the last module. The legs are inserted from below the body.
The head is formed from 3 orange modules, connecting them in series, the comb is formed from 3 red ones. Place the comb on the head and put on a yellow beak module that holds the parts together. A red triangle-beard is added to the bottom. Connect the head to the neck of the bird.

Make 5 colored tail feathers, 17 modules each. The wings are glued to the base of the rooster, and the tail is inserted.

Chick

To make a chick, 207 yellow and 6 red modules are prepared. For the beak you need 1 red triangle, half the size of the main parts.

Procedure:

Assemble a ring of 2 rows of 16 modules each, add 5 more such rows.
Row 8 consists of 16 pieces, put on with the short side forward to separate the body from the head. Lay 4 more rows of 16 pieces, long sides forward.
The last row consists of 10 modules, put on 2 or 3 corners of the parts of the bottom row. The top of the head is compressed to give it roundness.
The wings are assembled from two modules and glued to the sides of the chicken, a tail from 1 triangle is added.
The paws are made from 3 red modules, the tops of one are inserted into the pockets of the other 2 and attached to the bottom of the body.

Glue the chick's eyes and insert the beak. Cut the paper into fringe and form a chicken hairstyle.

Snake

A snake from modules is made curved or straight. The head and tail are assembled in the same way, but the production of the body differs in the technique and number of parts. For a straight snake you will need 237 triangles, for a curved one you will need 251 modules.

Procedure:

Start assembly from the tail. 2 modules are inserted into the pockets of the first triangle with both tops and 8 rows are continued, alternating 1 and 2 elements. The lateral corners of the tail are hidden.
Row 9 consists of 3, row 10 - of 2, and row 11 - of 3 modules. The straight snake continues to be assembled, alternating 2 and 3 elements in rows.
The bend of the snake is achieved by shifting the rows of modules. In the 12th row, 3 triangles are shifted to the right so that the extreme corner of the module remains free. The 13th row consists of 3 parts, put on without displacement. The next 3 rows are laid with a shift, 3 modules in a chain. In the 18th row, 3 parts are placed straight, the 19th row is assembled with a shift. In row 20 there are 4 modules. The result was one twist of the body.
Similarly, move rows from 21 to 25 to the left, collecting 3-4-3-4-4 parts in them. Then offset rows of 4 modules are assembled. Turns to the right or left are made from rows 35 to 38, from rows 47 to 50. The last turn from rows 57 to 58 goes to the head. In row 57 there are 3 modules, in row 58 there are 4 triangles.
Snake heads are collected in the same way. Lay 2 chains of 4 modules each, then according to the pattern 3, 4, 3, 2, 1. This is the lower part, a forked paper tongue is attached to it.
For the upper jaw, 5 modules are placed on the lower part with pockets at the top, leaving the extreme corners of the side triangles free. The jaw is assembled according to the 5-4-5-4-5-4-3-2 pattern.

The head is connected to the body. Small black eye modules are inserted.

Stork

To make a stork sitting in a nest, you need 40 black, 222 white and 104 brown modules. The beak for the bird is cut out of red paper.

Procedure:

Assemble a chain of 3 rows, 9 modules each, and close it in a circle. Turn it inside out and add 3 more rows.
Row 7 consists of 11 elements, 4 of which are put on 1 corner, and 7 - on 2 corners of the bottom row.
Rows 8 and 9 are assembled from 11 triangles; row 10 contains 12 modules.
On the body, choose a place for the chest and put on 4 parts. Lay 3 rows on top according to the pattern 3, 2, 1. Fold the corner of the chest up.
For the wing, 16 modules are connected, the corner of one is inserted into the pocket of the other. Row 2 consists of 15, row 3 – of 14 modules.
The 4th row of the wing is assembled from 12 black triangles. Row 5 – 6 black, arranged in three pairs at equal distances.
4 black modules are inserted into the base of the body - this is the tail.
The neck is assembled from 23 white modules and curved. Glue on the beak and eyes.
They make a nest - a brown circle of 3 rows, 26 modules in each.

The wings are glued to the sides of the body, the neck is connected to the chest. The stork is placed on the nest.

Dog

A two-color dog can be assembled from 37 white and 98 yellow modules. It is better to buy plastic eyes and nose. The modules are connected with the long side up.

Procedure:

For the base, assemble a ring of 2 rows, 8 yellow modules in each. In the 3rd row there are 7 yellow triangles and 1 white for the beginning of the chest.
Row 4 – 6 yellow and 2 white.
In row 5, 2 modules are added on the chest, making a total of 4 white and 5 yellow. This is how 2 more rows are collected.
In the 8th row, 9 modules are put on with the short side out. The next 4 rows of the head are assembled from 9 triangles with the long side up, forming the dog's white muzzle.
In the 13th row there are 4 yellow modules. They are placed above the puppy's muzzle with the short side forward - this is the dog's forehead.
The ear is assembled from 2 modules, the top of one part is inserted into the pocket of the other so that a curved piece is obtained.
The tail consists of 3 yellow and 1 white modules connected in series. The upper paws are assembled from 2 yellow and 1 white triangle.

Paws, ears and tail are inserted between the modules of the dog’s body. Eyes, a nose and a pink paper tongue are glued onto the face.

Peacock

Modular origami for beginners with the help of master classes allows you to learn how to make complex figures. Peacock is one of these crafts.

To create the royal bird, the following modules are prepared: 252 green, 128 purple, 217 blue, 45 white, 1 blue, 15 orange. The model's tail is wide open and consists of individual bright feathers.

Procedure:

To assemble the feather, 3 purple modules are connected in series. Then put on 2 blue ones and add 2 more blue triangles to their extreme tops. An orange module folded into a peephole is glued between them.
An arch is assembled from 9 green modules, where 2 chains of 4 triangles are connected at the top by a module. The sides of the pen are jagged.
The arch is connected to the feather blank, attaching it to the two inner corners of the blue modules. The result is a feather on a short stem; 7 of them are made.
A long feather is made in the same way, only the leg and arch consist of 11 modules. You need 8 of these blanks.
For the body, collect 3 rows of 15 white triangles and connect them into a ring, turning them inside out. Add 8 rows, 15 blue triangles each.
Determine the place for the paws and insert 2 green parts. The third blue row is counted down the back and 10 green modules are fixed in it - this is the place of the tail.

A corner blank is made from 3 green triangles by inserting the vertices of one into the pockets of 2 triangles. 9 such parts are assembled and placed on 10 tail base modules. A row of 17 purple modules is laid on top with the short side facing the body.
11 green modules are attached below this fan, and 10 corner modules are put on them green blanks, as in the previous stage. A row of 19 green triangles is collected on top. There are 2 fans at the bottom of the back.
Determine the place for the neck and put on 3 blue modules in the first row and 4 in the second. The next rows follow the pattern 3-4-3-2-3-2-3-2-1.
A neck is assembled from 7 blue triangles, lowering the corners of the next element into the pockets of the previous one. Add a head - a blue module and connect the neck to the body.
Short feathers are attached to the first part of the tail, along the purple row. Long feathers are placed on the back fan. 2 purple modules are inserted into the head - this is the crest.

Cut out and glue the peacock's eyes. A paper crown is placed on the crest.

Cat

To make a sitting cat, you need 386 modules of any color. All parts of the figure are assembled separately and connected at the end of the work.

Procedure:

For the base of the body, assemble a three-row chain of 19 modules in a row and connect it into a circle, turning it inside out.
Add 2 similar rows, inserting the elements with the long side out. Rows 6 to 10 consist of 16 triangles, rows 11 to 13 contain 13 modules.
The base of the head consists of 3 rows of 16 triangles connected into a ring. The workpiece is turned inside out and 3 more rows of 16 modules each are laid, then 3 rows of 13 elements each. Glue the head to the body.
Assembly of the paw starts from the bottom with 3 parts and continues according to the scheme 2, 1, 2, 1, 2,1. They make 2 legs and glue them to the front of the body.
The ears are assembled from 3, 2, 1 triangles. Free side corners are glued to obtain acute form.
The tail consists of 13 modules.

The ears are glued onto the head, the tail is glued with the flat side so that it peeks out from behind the cat’s body. The face is decorated with eyes, mustache and nose. A pink tongue is inserted.

The Dragon

Modular origami offers dozens of options for creating dragons. Beginning craftsmen will be interested in the technique of making this fairy-tale character. The Chinese dragon will be made from 473 red, 110 yellow and 18 black modules. There will be a yellow stripe running down its belly.

Procedure:

Assembly of the body begins with 3 red modules, located with the long side up. In the 2nd row, in the center, put on 2 yellow triangles with the short side up, and on the edges - 2 red modules, each on one top.
In the 3rd row - 3 red triangles, 4 are collected similarly to the 2nd row, then there is a strip of 3 pieces. This is how rows from 6 to 110 are alternated, resulting in 55 three-module and four-module rows. The dragon's body is bent.
The paw consists of the foot and the upper part. The top is formed according to the scheme 2, 3, 2, 1.
In the first 6 rows of feet in chains, 2 and 3 parts are changed. In row 7 there are 3 modules, in row 8 they are put on a black triangle. Assemble 4 upper and 4 lower parts.
1 row of the head consists of 4 pieces, 5 triangles are put on them. Then alternate rows according to the pattern 4, 3, 4,5,4. Row 8 consists of 3 modules located in the middle with the short side forward, and 2 black ones, which are placed at the edges at one corner, with the long side up.
In the 9th row in the middle there are 4 parts, short side first, and 2 black at the edges. The 3 central modules of row 10 are inserted with the long side up. On the 1st and 3rd elements of the 10th row, horns are formed, consisting of 1, 1 and 2 triangles. They are completed by 4 modules, assembled one into one.
The lower part of the head is assembled according to the 2-3-4-3-2-3 pattern. Roll up 4 small white modules - teeth.
The beginning of the tail consists of 6 sequentially nested triangles; from the 7th row it is expanded, alternating 1 and 2 modules. From rows 15 to 22, the tail is assembled in two-module and three-module chains. Its end is decorated with black elements, gluing them in the shape of a Christmas tree. Attach the tail to the body.
The parts of the head are connected, the teeth are inserted into the jaws from above and below, and the eyes are glued. Assemble 4 legs.

The head and paws are glued to the body. There are 10 black modules on the back, these are dragon spikes.

Rainbow Vase

The colorful stripes of the rainbow vase are arranged vertically and taper at the top. The effect of color transition from one to another is created by shifting the modules. For the craft, prepare 320 triangles of red, orange, yellow, green, blue, and purple.

Procedure:

In row 1 there are 12 modules - 2 red, 2 orange, 3 yellow and then, like a rainbow. In the 2nd row, the triangles are shifted to the right, capturing the lower tops of a different color. They make only 3 rows, resulting in a blank of 6 colors. 6 such structures are collected and closed into a ring - this is the base of the vase.
Lay out 11 rows according to the pattern, shifting each pair of modules 1 corner to the right. The craft takes the shape of a round vessel, its walls are carefully adjusted.
The neck of the vase is formed from the 12th row, in which half as many triangles are laid. Between parts of the same color, insert 1 module of the same color and make 1 more row.
In the following rows, the number of modules does not change, but in each chain they are shifted 1 corner to the left. So the vase is assembled to the end.

In addition to a pleasant pastime, practicing modular origami brings real benefits. A novice master can decorate a room for a holiday and diversify the table setting. And his relatives and friends will not be left without an original gift.

Article format: Natalie Podolskaya

Video about modular origami

Modular origami for beginners - how to make a 1/32 module:

Hi guys! I continue the topic on March 8, namely, I want to share my finds of beautiful and at the same time not too labor-intensive flowers using the origami technique. These flowers can be placed on a postcard or even in a vase. Or you can make a whole composition on postcards from flowers and birds, because March 8 is spring, a day of tenderness, love, warmth, flowers and birdsong in the soul and outside the window. Today on the agenda is an origami paper flower diagram and not even one.

I'll start with my favorite simple and beautiful flower, and then I'll post all the most interesting diagrams and videos that I found.

Origami flower - step by step photo

On this day there is a sea of flowers everywhere, because it is also a holiday of spring and the awakening of nature. Children begin to prepare in advance for March 8: they make drawings, postcards or make crafts with a spring theme. If your child is not yet familiar with the origami technique, you can show him how to make beautiful flower from paper. This craft will not be difficult to make if you follow our master class.

To create a flower we will prepare:

orange and green paper;
ruler;
scissors;
pencil;
PVA glue.

Our flower will consist of separate modules, and we will make them from small squares measuring 6x6 cm.

First, this small square needs to be bent along two diagonals.

After this we do the fold in half.

Please note that the transverse and diagonal folds are directed in different directions.

Now we fold the workpiece in the form of a small double square.

We bend the right side of the top layer towards the middle.

Let's do the same with the left side.

Using the same principle, we make 7 more blanks, which will be the petals of our flower.

Now let's start connecting them together. To do this, apply glue to the edge of one petal.

Apply the second petal.

Add a third one, connecting it with glue to the previous one.

This is how we collect the whole flower.

For the stem, cut out a rectangle from green paper.

It needs to be rolled into a tube. It is more convenient to do this from a corner. We fix the beginning and end of the work with glue.

For the leaves, cut out another rectangle (about 7x8 cm).

Let's fold it in half.

After this we will make another fold. So we can make two leaves at once.

Cut out the outline of half the leaf.

We got 2 leaves.

To attach the flower to the stem, apply a little glue to the green stick.

Glue the orange flower.

Below on the stem we fix a green leaf.

We place the second leaf nearby.

The core of the flower can be decorated with a small rhinestone.

Our paper flower using the origami technique is ready.

Origami tulip

Rose

Three wonderful roses - I like them all. Click on the photo to see the full MK

The simplest rose, but very beautiful, especially if you make it small. Mk is in Italian, but everything is clear. Enjoy watching. If anything, turn on Russian subtitles in the settings

Another no less simple rose, I would say, not even a rose, but Eustoma

Almost like the real thing and not the most complicated

Beautiful rose - bud

Volumetric rose for the most patient

Magic ROSE CUBE made of paper - MOVING ORIGAMI

Lotus

Lotuses come in different designs. But what I like most about lotuses is not the design feature, but the use of designer paper, velvety or patterned, or even vintage newspaper.

In order to easily master all the intricacies of origami, you first need to understand what it is and study the history of the origin of this activity. Not everyone can master origami. Whether you make a flower or an animal doesn’t matter at all, the main thing is to follow the technique.

The Art of Paper Folding

Origami is paper creativity. Origami has its roots in Japan. Despite the fact that paper was invented in China, the origami folding technique itself was invented in Japan.

The origami technique has been passed down from father to son for many centuries. Paper origami was even used during rituals in the temple. At the end of the sixteenth century, the technique of origami was transformed from sacred ceremonies into a Japanese pastime. The people of Japan began to create flowers, airplanes, cranes and much more from paper.

When making origami "Flower" follow the diagram. The most important rule in creating a figurine is care. Under no circumstances should you rush, otherwise you will end up with uneven lines. Flowers are considered the most popular crafts.

It is not at all difficult for experienced craftsmen to read an origami diagram, but beginners will need a lot of time to master this technique. Folding patterns were created many years ago. On them you can see how to bend the sheet. Please note that some lines are dotted and some are solid. If you follow the diagram, mastering the technique is not difficult at all. Moreover, step-by-step instruction will make your task much easier. There are sheets designed for origami that are sold with folding lines already applied to them. By purchasing them, you can be sure of a successful result. We will tell you how to make a flower (origami). The scheme is very simple.

Light paper flower

We met this flower back in kindergarten, when they hadn’t even heard what origami was. Making a flower isn't just about folding. The flower needs to be made lush, and in order to get this result, it is filled with air (in our case, by blowing into it). If you used to use ordinary single-sided colored paper, now, to make a tulip, you can purchase special or double-sided colored paper.

To create the flower, follow the pattern shown in the picture above. The stem is made of paper. Twist a rope or take an ordinary twig from a tree, plant a flower on it, and decorate the branch with paper leaves. In this way you can create a whole bouquet of tulips and decorate a vase with them.

Lotus

The next flower option is the lotus. The diagram for creating this flower can be seen in every origami tutorial. It is considered classic and popular. It is created from one sheet of paper. The size of the flower depends on the leaf chosen. You can create this beautiful flower in different ways. Modular origami can also be used.

More complex paper flowers

Now let's look at other interesting paper color schemes. Such crafts are no longer intended for children, but for adults. This origami "Flower" will become a real decoration for your home.

Having created beautiful irises, they can be placed in a flower pot decorated with pebbles or decorative stones. The design of irises is practically no different in complexity from that of tulips. The main thing is accuracy and clarity in performing each stage. By bending the petals, you can give them the desired shape. The stems are made from wire, after which they are wrapped in corrugated paper. The leaves are cut out of thick colored paper and attached to the base of the stem.

Beauty rose

You can’t do without the queen of flowers - the rose. There are a lot of schemes for creating this flower; you can create blooming flowers, or you can give preference to buds.

By folding a flower you get great pleasure. The flower inflates in the same way as a tulip. The rose petals need not only to be bent, but also curled with a pencil. This way you will get a more natural origami flower.

Modular origami

Not everyone likes a flower made from a single sheet of paper. Modular origami will allow you to create something more complex and unusual. This design is quite complex. Often the modules are triangular in shape; there are others, but they are used very rarely. Folding the parts is not at all difficult, the main thing is to be patient, because it will take a lot of time to create the craft.

Modular flowers can be either voluminous or flat. In order to achieve a good result, glue is used to fasten the modules. Your flower will turn out voluminous, and the details will not fall apart.

When creating modular origami “tulips,” the flowers are first folded in a circle, resulting in a figure similar to the sun with rays, and then turned inside out so that the rays are on the short side outward. Then they continue to collect the flower the right size. The flower is attached to the stem using glue. One tulip takes about a hundred triangles. The flowers are voluminous and beautiful.

Now you know how to make origami “Flower” on your own. Use paper of different colors and textures, then your creations will be unique and decorate the interior.

You can create a spring atmosphere with homemade paper decorations in the form of flower arrangements. If you want your flowers to be voluminous and realistic, use the origami technique.

As a rule, it only takes a few minutes to create such crafts.

See step-by-step diagrams of origami paper flowers with your own hands - and choose which crafts to make to decorate your home or give as a gift to loved ones.

How to make an azalea out of paper

Just a few steps are required to create a realistic azalea that will delight you with bright colors. But you must be careful in your work, otherwise it will not have the correct proportions, so strictly follow the description of how to make an origami flower of this type from paper.

The craft will include two elements: the flower itself and the stamens.

For the sheet you will need two rectangular paper fragments with parameters 2 to 1. They can be cut out as shown in the picture. A large fragment will be needed for the main flower, and a smaller rectangle will be needed for the inside of your azalea.

Advice: choose a thin and soft paper sheet, since it will have to be folded repeatedly to create a realistic flower.

How to make such paper flowers step by step, watch the video:

Paper bell

One of the flowers that is quite easy to fold even with no experience is a bell. You will need a square piece of paper, something like a twig, as well as a ball and thread to secure the bud.

It will take about ten minutes to create such a craft.

A diagram for beginners on folding an origami paper flower in the shape of a bell - in the photo:

Fold the square sheet as shown in the diagram. Next, bend the sides inwards, and after them – the upper parts of the paper figure.

Fold all the petals over outside– and open the bud. All that remains is to secure such flowers on the branch using auxiliary materials.

Origami in the form of a tulip

There are quite a few interesting schemes origami tulip. We will tell you about a method for creating origami for beginners. You can choose paper of any color as the main material: you will need two square blanks.

How to make origami flowers in the form of tulips step by step:

take a square sheet and bend it crosswise diagonally. After this, open it and roll it into a triangle along the folds formed;
Bend sharp corners to obtuse ones. As a result, you will get a small square fragment;
turn the craft over. Bend the lower zones of the sides towards each other and secure with glue;
The tulip flower should be made voluminous. To do this, inflate it through a small opening;
open the petals and thread a homemade stem through the hole in the base. The tulip is ready!

Another interesting way is presented in the video - fold an origami - a tulip flower - from paper:

Collecting lotus

Origami from white or colored paper lotus is also made from a square blank. Moreover, you can make such a flower multi-colored (that is, double-sided). First, fold the square along the diagonals. After this, fold the corners towards the center to form additional folds. The assembled figure will have the shape of a diamond.

Turn the craft clockwise to make a square again - and repeat the procedure, folding the corners towards the center. Turn the figure over and bend the edges of the square halfway. Turn the flower over again and straighten all the petals so that it becomes voluminous.

You can learn more about the procedure on how to make such an origami flower out of paper using the video:

How to make an origami rose

To collect origami roses you will need soft paper that is easy to fold and wrap. But keep in mind that if the work is not done carefully, it may tear and the flower will lose its appearance.

First, check out the diagram of an origami paper flower. The square blank will need to be folded several times to obtain folds that will allow the craft to take the desired shape.

Now begin to smoothly wrap the base to the side so that you get something like a rose: the craft will need to be secured at the base so that the shape does not fall apart.

Lily with your own hands

Now let's describe a simple origami lily pattern. To create it, you will need high-quality paper of good thickness, as well as a needle and thread.

Make a square piece with a side of 9 centimeters. Bend the square lengthwise, then diagonally and lengthwise again. Press the middle of the sheet and fold it so that you get a “double square”.

Bend each side of the figure and iron it: repeat this procedure four times.

Now bend the corners to the center of the craft, straighten the “pocket”, bending its bottom up (and repeating this action four times). Also bend the tail of the unfolded craft upward.

Now turn the craft over and bend the corners into the center. Spread the flower petals and bend them back. All that remains is to completely straighten the bud and bend it slightly using scissors. If you are afraid that the flower will fall apart, secure the base with thread.

That's the whole secret of how easy it is to make a simple origami flower!

Simple flower for children

For beginners, it is better to make origami flowers from paper according to the simplest patterns. For example, you and your child can make daffodils.

This origami color scheme for children begins with preparing four rectangular yellow fragments. The sheet dimensions should be 10.5 by 4.5 centimeters. You will also need a square piece of paper with a side of 4.5 centimeters. Separately prepare green paper for the stem and leaves.

This craft is very simple to make. The petals and center of the flower are folded to look voluminous. Watch the video to understand the details:

Circle flower

Origami flowers from paper circles are no less easy to make. You will need A4 sheet, glue, scissors and compass.

How to make flowers like this:

draw six circles on a sheet of paper and cut them out with scissors;
fold each of the fragments in half vertically and horizontally;
manually make indentations between the cross-shaped folds and carefully press the figures;
Apply glue on one side of the recesses and connect them to each other;
Process the remaining circles in the same way.

Connect the triangular petals that result from such manipulations to each other using glue. After drying, open the flower and glue the last and first ones to each other.

If you wish, you can make origami flower bouquets from such elements.

Multifaceted flower - kusudama

DIY origami paper flower crafts in the form of kusudama are becoming increasingly popular. Kusudama is a kind of ball consisting of several elements connected to each other, assembled from paper. Thanks to the huge variety of collections of such origami flower balls, you can decorate your home in an original way to suit your own taste.

We will tell you about a simple circuit to which you can connect children. For a kusudama flower made of paper, you need to take 60 squares with a side of seven centimeters and glue. These will make twelve constituent elements.

Advice: To make the craft more vibrant, think about how to alternate several shades when collecting and attaching floral elements.

Step-by-step instructions for origami - kusudama:

bend the square twice: you should get a triangle;
Fold the two bottom corners of the triangle towards the top. You will get a rhombus;
fold the triangular “flaps” in half, then unfold and smooth out;
now turn the corners of the “flaps” so that they are aligned with the boundaries of the paper fragment;
now bend the triangles back along the pre-made fold - and glue;
form five petals and connect them together with glue. The flower is ready.

Now you should connect these flowers. To complete the craft, you will need not only glue, but also a cord (or ribbon) to hang the kusudama, as well as beads for decoration. It is enough to glue the flowers together so that there are five more around each one. Apply glue to the right of the center fold line.

It is very important that the craft dries thoroughly. If you follow the instructions, you will get a uniform volumetric ball of flowers. All sides of each flower must be glued to adjacent parts of the same type.

You can string beads onto a cord. After this, tie it, forming a knot for the last bead. Glue it to the surface of the craft from the inside so that the ends of the material do not stick out. To make a loop, secure both sides inside the kusudama.

As you can see, there is nothing complicated in creating such a craft. But in order to consolidate this master class, watch the video with details of creating the most beautiful kusudama from flower modules:

Now you know a lot of interesting and simple ways how to make origami out of paper. Decorate your apartment and add new ones to the interior bright colors and floral motifs!

Read about how to do it: step-by-step instructions for weaving products from newspaper tubes with your own hands.

You will find a simple do-it-yourself clock mockup made from cardboard in the diagram.

By the way, you can achieve the desired effect in another way - by making origami from modular elements. See an example of such beautiful origami paper flowers in the video: